Leading the lifting & rigging industry
Certex Logo

Categories

Harrington CB Chain Hoists

Harrington CB Chain Hoists

• Thick die-cast aluminum body
• High-strength, heat-treated main pinion shaft and load gear
• Positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking
• Smooth running, pre-lubricated ball bearings, and precision machined drive train components
• Fewer parts for an easy-to-work-on design
• 10-foot lift is standard, 15- and 20-foot lifts are also stocked; nonstandard lifts and hand chain drops available as well.
• Grade 100 heat-treated manganese alloy load chain resists abrasion and wear while minimizing chain weight.
• Forged and heat-treated alloy steel hooks are designed to open slowly and not fracture under excessive loads.
• Test certificate verifies that every hoist has been factory load tested to 125% of rated capacity, in accordance with ASME B30.16 requirements.


EMAIL PAGE

EMAIL PAGE


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

Cap. (tons) Product Code Headroom C (in) Std. Lift (ft) Pull to Lift Load (lbs.) Overhaul Ratio Load Chain Dia. (mm.) x Chain Fall Lines Net Weight (lbs.) Shipping Weight Approx (lbx.) Weight for Additional One Foot of Lift (lbs.)
1/2 CB005 11.2 8 48 25 5.0 x 1 24 25 1.0
1 CB010 11.6 8 58 43 6.3 x 1 28 29 1.2
1 1/2 CB015 13.8 8 70 57 7.1 x 1 35 36 1.4
2 CB020 14.8 8 72 70 8.0 x 1 45 47 1.6
2 1/2 CB025 16.5 8 66 99 9.0 x 1 60 62 1.8
3 CB030 20.1 8 72 114 7.1 x 2 54 58 2.1
5 CB050 23.6 8 68 198 9.0 x 2 91 95 3.0
8 CB080 30.3 8 75 297 9.0 x 3 133 140 4.1
10 CB100 29.9 12 72 396 9.0 x 4 176 194 5.3
15 CB150 40.2 12 74 594 9.0 x 6 331 353 7.6
20 CB200 46.5 12 72 x 2 396 x 2 9.0 x 8 503 657 10.6
30 CB300 51.2 12 86 x 2 495 x 2 9.0 x 10 665 864 12.9
40 CB400 58.3 12 86 x 2 693 x 2 9.0 x 14 1033 1364 17.6
50 CB500 61.4 12 98 x 2 792 x 2 9.0 x 16 1382 1713 19.9
80 CB800 100.8 12  86 x 4 693 x 4 9.0 x 28 3298 – 35.2
100 CB1000 125.2 12 98 x 4 792 x 4 9.0 x 32 6419 – 39.9
Cap. (tons) Product Code a (in) b (in) d (in) e (in) f (in)g  (in) x (in)
1/2 CB005 6.2 6.3 8.0 2.7 3.9 1.1 3.5
1 CB010 6.4 6.3 8.0 2.8 3.9 1.1 4.0
1 1/2 CB015 6.7 7.2 8.0 3.1 4.4 1.3 4.7
2 CB020 7.2 8.0 8.0 3.4 4.9 1.4 4.9
2 1/2 CB025 7.6 9.2 8.0 3.6 5.6 1.6 5.4
3 CB030 6.7 9.3 8.3 3.1 6.4 1.7 5.8
5 CB050 7.6 11.1 10.0 3.6 7.6 1.8 6.8
8 CB080 7.6 14.7 10.3 3.6 10.0 2.9 10.8
10 CB100 7.6 17.2 14.9 4.4 12.1 2.9 11.7
15 CB150 10.6 19.4 15.9 4.7 13.3 3.1 12.6
20 CB200 14.7 29.4 16.3 7.4 14.7 3.2 13.8
30 CB300 15.9 29.4 16.3 8.0 14.7 4.1 15.7
40 CB400 19.8 29.9 16.6 9.9 15.0 3.8 17.5
50 CB500 21.4 31.3 16.6 10.7 15.7 4.0 18.4
80 CB800 29.9 55.2 15.9 13.8 27.6 5.1 –
100 CB1000 31.3 56.9 14.6 15.7 28.4 7.3 –

harrington-chain-falls-8 to 15 tons harrington-chain-falls-20 to 100 tons harrington-chain-falls- 3 to 5 tons harrington-chain-falls- half -2&half tons

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

dynarope® HF37 dynarope® Tensiometer

dynarope® HF37 dynarope® Tensiometer

The dynarope® tension meter is a precision device for measuring forces in a tensioned cable or rope. The meter can be attached directly to the cable and has a fixed display.

When the tension meter is placed on a tensioned cable, the load cell will generate a signal which is more or less proportional to the force.

The HF 37 series can be connected to a PC for managing and storing measurement results.

There is a large variety of cables, each cable having its own characteristics such as composition, diameter, rigidity, density, etc. The database includes several basic wire rope data. We are happy to help you choose the right model and parameter settings in our wire rope database.

dynarope® HF 36 – Tensiometer

dynarope® HF 36 – Tensiometer

The dynarope® HF 36 is an electronic load cell that has been designed to measure the effort applied in a wire rope. The resulting signal is used in a digital remote display (model HF 87/T/LPT) controlled by a microprocessor, which corrects the force information according to the wire rope specification and displays the result of the measurement on a LCD display.

Several wire ropes specifications are logged in a data bank.

dynasafe® HF 05 Tension Load Limiting Cell

dynasafe® HF 05 Tension Load Limiting Cell

The dynasafe® HF 05 mechanical load cell has been designed to provide a trip point in lifting systems, which have a dead-end wire rope. The trip point load limiter generates an “all or nothing” type signal in the event the programmable target value is exceeded.  Available in one or two thresholds versions.

The load cell is preferable for fitting applications where it is essential to minimize the lost headroom.

dynafor® Expert- sensor only – capacity from 1/2 t to 10 t. Accuracy: +/- 0.1% dynamometer

dynafor® Expert- sensor only – capacity from 1/2 t to 10 t. Accuracy: +/- 0.1% dynamometer

The Dynafor® Expert, designed and manufactured by Tractel, is a wireless digital dynamometer, used in high precision applications. With its unique design, it allows to reach extreme precision.
Based on the principle of strain gauge extension measurement, the sensor generates an electrical signal which is processed and analyzed by a built-in microprocessor, which transmits the information to a wireless accessory.

Equipped with radio 2.4 GHz (RF) and Bluetooth (BLE) chipsets available all time, the Dynafor® Expert provides a wireless range of 1,300 ft. (400 m) to Tractel Dynafor® HHD, large displays AL128 and software accessories 100 ft. (30 m) to any smartphone equipped with our free Dynafor® app on iOS or Android
Compatible with standard bow and clevis shackles, the Dynafor® Expert ensures a perfect implementation in your applications.