• Approved for overhead lifting
• Forged alloy steel
• Quenched & tempered
• Powder coated HI-VIZ safety orange
• 100% proof tested at 2 times the working load limit
• 100% mag-particle crack detection
| STOCK NUMBER | CHAIN SIZE | DIMENSIONS | WORKING LOAD LIMIT 4:1 |
||
|---|---|---|---|---|---|
| A | B | C | |||
| XV1-7/8i | 9/32”-5/16” | 0.551” | 2.75” | 4.72” | 5,700 lbs. |
| XV1-10i | 3/8″ | 0.669” | 3.15” | 5.51” | 8,800 lbs. |
| XV1-13i | 1/2″ | 0.866” | 3.74” | 6.29” | 15,000 lbs. |
| XV1-16i | 5/8″ | 0.984” | 4.33” | 7.48” | 22,600 lbs. |
NOT TO BE USED FOR BASKET APPLICATION.
| STOCK NUMBER | SIZE | DIMENSIONS | WORKING LOAD LIMIT 4:1 |
||
|---|---|---|---|---|---|
| A | B | C | |||
| XV2-7/8i | 9/32”-5/16” | 0.669” | 3.15” | 5.15” | 9,900 lbs. |
| XV2-10i | 3/8″ | 0.866” | 3.74” | 6.29” | 15200 lbs. |
| XV2-13i | 1/2″ | 0.984” | 4.33” | 7.48” | 26000 lbs. |
| XV2-16i | 5/8″ | 1.26” | 5.11” | 9.05” | 39100 lbs. |
| STOCK NUMBER | SIZE | DIMENSIONS | WORKING LOAD LIMIT 4:1 |
||
|---|---|---|---|---|---|
| A | B | C | |||
| XV4-7/8i | 9/32”-5/16” | 0.669” | 3.15” | 5.51” | 14,800 lbs. |
| XV4-10i | 3/8″ | 0.866” | 3.74” | 6.29” | 22,900 lbs. |
| XV4-13i | 1/2″ | 0.984” | 4.33” | 7.48” | 39,000 lbs. |
| XV4-16i | 5/8″ | 1.26” | 5.11” | 9.05” | 58,700 lbs. |
NOT TO BE USED FOR BASKET APPLICATION.
When re-certifying an X100 master link, the pin or rigging used must not be less than 40% of greater than 60% of the master link’s inside width.
| STOCK NUMBER | DIMENSIONS | ||
|---|---|---|---|
| A | B | C | |
| XV1-7/8i | 0.551” | 2.75” | 4.72” |
| XV1-10i | 0.669” | 3.15” | 5.51” |
| XV1-13i | 0.866” | 3.74” | 6.29” |
| XV1-16i | 0.984” | 4.33” | 7.48” |
| STOCK NUMBER | DIMENSIONS | ||
|---|---|---|---|
| A | B | C | |
| XV2-7/8i | 0.669” | 3.15” | 5.15” |
| XV2-10i | 0.866” | 3.74” | 6.29” |
| XV2-13i | 0.984” | 4.33” | 7.48” |
| XV2-16i | 1.26” | 5.11” | 9.05” |
| STOCK NUMBER | DIMENSIONS | ||
|---|---|---|---|
| A | B | C | |
| XV4-7/8i | 0.669” | 3.15” | 5.15” |
| XV4-10i | 0.866” | 3.74” | 6.29” |
| XV4-13i | 0.984″ | 4.33” | 7.8” |
| XV4-16i | 1.26” | 5.11” | 9.05” |
When re-certifying an X100 master link, the pin or rigging used must not be less than 40% of greater than 60% of the master link’s inside width.
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Grade 8 towing bow shackle with safety bolt and wider shackle mouth Product details Productcode G-4463
Dee shackle with square sunken hole screw pin (flush pin) Product details Productcode G-4159 Material bow and pin high tensile steel, Grade 6, quenched and tempered Safety factor MBL equals 6 x WLL Finish hot dipped galvanized Certification 2.1 2.2 3.1 MTCa CE/em>...
Bow shackle with square sunken hole screw pin (flush pin) Product details Productcode G-4169 Material bow and pin high tensile steel, Grade 6, quenched and tempered Safety factor MBL equals 6 x WLL Finish hot dipped galvanized Certification 2.1 2.2 3.1 MTCa CE...
Dee shackle with square headed screw pin Product details Productcode G-4154 Material bow and pin high tensile steel, Grade 6, quenched and tempered Safety factor MBL equals 6 x WLL Finish hot dipped galvanized Certification 2.1 2.2 3.1 MTCa CE Standard EN 13889 and...
