Leading the lifting & rigging industry
Certex Logo

Categories

Crosby® S-501 Open Swage Socket

Crosby® S-501 Open Swage Socket

Swage sockets incorporate a reduced machined area of the shank which is equivalent to the proper after Swage dimension. Before swaging, this provides for an obvious visual difference in the shank diameter. After swaging, a uniform shank diameter is created allowing for a QUIC-CHECK™ and permanent visual inspection opportunity.


EMAIL PAGE

EMAIL PAGE


VIEW IN CATALOG

VIEW IN CATALOG


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

S-501 Open Socket Specifications
CERTEX Cat. Ref. No. Crosby Stock No. Rope Size (in.) Weight Each (lbs.) Before Swage Dimensions Max. After Swage Dim. (in.)
A B C D E F H L M N
CX04-0143 1039021 1/4 .52 4.81 .50 1.38 .69 .27 2.13 .69 4.00 .38 1.50 .46
CX04-0144 1039049 5/16 1.12 6.25 .77 1.62 .81 .34 3.19 .81 5.31 .47 1.75 .71
CX04-0145 1039067 3/8 1.30 6.25 .77 1.62 .81 .41 3.19 .81 5.31 .47 1.75 .71
CX04-0146 1039085 7/16 2.08 7.81 .98 2.00 1.00 .48 4.25 1.00 6.69 .56 2.00 .91
CX04-0147 1039101 1/2 2.08 7.81 .98 2.00 1.00 .55 4.25 1.00 6.69 .56 2.00 .9
CX04-0148 1039129 9/16 4.67 9.50 1.25 2.38 1.19 .61 5.31 1.25 8.13 .66 2.25 1.16
CX04-0149 1039147 5/8 4.51 9.50 1.25 2.38 1.19 .67 5.31 1.25 8.13 .66 2.25 1.16
CX04-0150 1039165 3/4 7.97 11.56 1.55 2.75 1.38 .80 6.38 1.50 10.00 .68 2.75 1.42
CX04-0151 1039183 7/8 11.52 13.41 1.70 3.13 1.62 .94 7.44 1.75 11.63 .75 3.25 1.55
CX04-0152 1039209 1 17.80 15.47 1.98 3.69 2.00 1.06 8.50 2.00 13.38 .88 3.75 1.80
CX04-0153 1039227 1-1/8 25.25 17.31 2.25 4.06 2.25 1.19 9.56 2.25 15.00 1.00 4.25 2.05
CX04-0154 1039245 1-1/4 35.56 19.06 2.53 4.50 2.50 1.33 10.63 2.50 16.50 1.13 4.75 2.30
CX04-0155 1039263 1-3/8 43.75 20.94 2.80 5.00 2.50 1.45 11.69 2.50 18.13 1.13 5.25 2.56
CX04-0156 1039281 1-1/2 58.50 22.88 3.08 5.50 2.75 1.58 12.75 3.00 19.75 1.19 5.75 2.81
CX04-0157 1039307 1-3/4 88.75 26.63 3.39 6.69 3.50 1.86 14.88 3.50 23.00 1.56 6.75 3.06
CX04-0158 1039767 2 146.25 31.44 3.94 8.00 3.75 2.11 17.00 4.00 26.88 1.56 8.00 3.56

* Maximum Proof Load shall not exceed 40% of XXIP rope catalog breaking strength.

Wire Rope Terminations Information

Designed to quickly determine whether the socket has been through the swaging operation and assist in field inspections, it does not eliminate the need to perform standard production inspections which include gauging for the proper after swage dimensions or proof loading.

U.S. Patent 5,152,630 and foreign equivalents.

• Forged from special bar quality carbon steel, suitable for cold forming.
• Hardness controlled by spheroidize annealing.
• Swage Socket terminations have an efficiency rating of 100% based on the catalog strength of wire rope.
• Stamp for identification after swaging without concern for fractures (as per directions in National Swaging Brochure).

NOTE: S-501 Swage Sockets are recommended for use with 6 x 19 or 6 x 37,
IPS or XIP (EIP), XXIP (EEIP), RRL, FC or IWRC wire rope.In accordance with
ANSI B30.9, all slings terminated with swage sockets shall be proof loaded.*

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Tiger TRCB Industrial Chain Block

Tiger TRCB Industrial Chain Block

Range from 500kg – 5.0t Meets or exceeds all international standards High quality alloy calibrated load chain Rugged steel body construction Drop forged & heat-treated alloy hooks Proof tested to 1.5 times rated capacity Lightweight and portable Safe reliable twin...

Tiger PROCB (TCB) Professional Chain Block

Tiger PROCB (TCB) Professional Chain Block

DNV GL Verification tested according to NORSOK R-002 Range from 250kg – 35.0t Available with slipping clutch overload protection Tested and certified for “fleeting”, “drifting” and “cross-hauling” applications up to 60° from the vertical without deration Available...

TAHS Pneumatic Air Hoist 250kg – 2t

TAHS Pneumatic Air Hoist 250kg – 2t

Range – 0.25 tonne to 2.0 tonne Reliable, fast, efficient, quiet and lightweight Greater than 5:1 factor of safety Suitable for Fleeting/Oblique pulling Certified for ATEX Category 3 – normal safety

Tiger TAH-M Twin Hook Air Hoist

Tiger TAH-M Twin Hook Air Hoist

TAH21M 2.0t/2.0t configuration TAH33M 3.0t/3.0t and 3.0t/6.0t configurations Two chain falls with hooks for alternate working Various hook options – standard, closed eye, grab and self-locking Integral load limiter Especially suitable for horizontal pulling Reliable,...