| CERTEX Cat. Ref. No. | Size | Approx. Weight per 1000 ft. Pounds | Breaking Strength Pounds* |
|---|---|---|---|
| CX01-0178 | 3/32″** | 17 | 920 |
| CX01-0179 | 1/8″** | 29 | 1,760 |
| CX01-0180 | 5/32″** | 45 | 2,400 |
| CX01-0181 | 3/16″** | 65 | 3,700 |
| CX01-0182 | 1/4″** | 110 | 6,400 |
| CX01-0183 | 5/16″** | 173 | 9,000 |
| CX01-0184 | 3/8″** | 243 | 12,000 |
*Listed for comparison only. Actual operating loads may vary, but should never exceed 20% of catalog Breaking Strength.
**According to MIL-W-83420D, with exceptions. Meeting Federal Specification RR-W-410D.
NOT FOR AIRCRAFT USE. (“Aircraft Cable” has become an accepted industry term for small diameter 7×7 and 7×19 construction wire rope intended for industrial and marine application.) Read important warnings and information preceding wire rope section.
WARNING: Any warranties, expressed or implied, concerning the use of this product apply only to the nominal strength of new, unused wire rope. All equipment using this product must be properly used and maintained. Wire rope must be properly stored, handled, used and maintained. Most importantly, wire rope must be regularly inspected during use. Damage, abuse or improper maintenance can cause rope failure. Consult the AISI Wire Rope Users Manual, ASME or ANSI Standards, before usage. Wire rope removal criteria are based on the use of steel sheaves. If synthetic sheaves are used, consult the sheave equipment manufacturer. WARNING!
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Motorized Rotating Crane Hooks make rotating loads on the crane hook easy for the operator. Each unit is custom designed per your requirements. Product Features: Sheave pin includes lubrication fittings External lubrication on heavy duty thrust bearing Heavy duty worm...
Put the power and control in the crane operator's skilled, capable hands with the Caldwell Motorized Rotating Crane Hook. With full 360-degree rotation, the operator can place loads in tough to reach or access locations with ease, orienting them exactly right. Product...
Turn your excavating equipment into a reliable lifter with this weld-on hook. Carefully follow welding instructions for best results. Product Features: Latch prevents accidental unhooking of load Latch is resistant to dirt, concrete, and ice Stainless steel latch...
Product Features: Forged steel Large crane hook opening for easier rigging Web-Trap design Functions as both triangle and choker Plated for corrosion resistance Use with only one or two ply web slings Use with roundslings up to 5,300 pound rated capacity Complies with...
