Certex Logo

Categories

Certex Wheel Nets

Certex Wheel Nets

CERTEX Wheel Nets make for fast loading of any size vehicle due to the lightweight, high strength synthetic webbing. This webbing is soft and flexible to conform to any surface. These wheel nets are used in matched sets and are designed and fabricated to your specific requirements. When not in use these wheel nets fold up for easy storage and are not affected by moisture.

CERTEX Wheel Nets come in standard capacities and sizes from 5 tons through 30 tons. Call your nearest CERTEX location for more information. Please have vehicle body size, capacity of vehicle and length from ground level to lifting device.

Wear Pads & Sleeves
Wear pads give a sling extra protection where it wears the most. They can be furnished in either webbing or leather. Leather pads are more resistant to wear and cutting, but are subject to gradual deterioration from oils, grease and dirt. Nylon webbing wear pads are fully resistant to oils, grease, and they stretch in proportion to the sling.


REGULAR – This is the type that is sewn on to give fixed protection at expected wear points. They can be sewn anywhere on the sling, at any length on one side or on both sides.


EDGEGUARD – A strip of webbing or leather is sewn around each edge of the sling, extending approximately 1/2” onto the face of the webbing. This is necessary for certain applications where sling edges are subject to damage.


SLEEVE – Sometimes called sliding sleeve or tube type wear pads, these pads are suggested for handling material with sharp edges. Sleeves cover both sides of the sling and can be shifted to wear points.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

RUD Load Ring – VLBS Ring Only

RUD Load Ring – VLBS Ring Only

Large WLL range 1.5 t – 16 t Functionally optimized shape of the suspension ring for better support at side loading and protection of the clamping spring WLL possible up to 90° in load ring plane