Certex Logo

Categories

Renfroe JPA Vertical Lifting Locking Clamps

Renfroe JPA Vertical Lifting Locking Clamps

Model JPA 

The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock.
Permits side loading of lifting shackle to 90 degrees by derating of clamp’s rated capacity.
Refer to FIGURE 1 for derated capacities.

Specifications (In Inches)

CERTEX Cat. Ref. No Rated Capacity Ton Plate Thickness A B C D E F G H J K Weight (in pounds)
CX12-0252 0 – 5/8 2 3/4 6 1/2 12 2 3/8 5 5/8 3 1/4 2 1/4 1/2 3/4
CX12-0253 1/2 1/2 – 1 2 3/4 6 1/2 12 2 3/8 6 3 1/4 2 1/4 1/2 3/4 12
CX12-0254 3/4 – 1 1/4 2 3/4 6 1/2 12 2 3/8 6 1/4 3 1/4 2 1/4 1/2 3/4
CX12-0255 1 1/4 – 1 3/4 2 3/4 6 1/2 12 2 3/8 6 3/4 3 1/4 2 1/4 1/2 3/4
CX12-0256 0 – 3/4 3 3/8 7 3/4 13 3/4 2 5/8 7 3 1/2 2 5/8 5/8 3/4
CX12-0257 1/2 – 1 3 3/8 7 3/4 13 3/4 2 5/8 7 1/4 3 1/2 2 5/8 5/8 3/4
CX12-0258 1 3/4 – 1 1/4 3 3/8 7 3/4 13 3/4 2 5/8 8 3 1/2 2 5/8 5/8 3/4 20
CX12-0259 1 – 1 1/2 3 3/8 7 3/4 13 3/4 2 5/8 8 1/4 3 1/2 2 5/8 5/8 3/4
CX12-0260 1 1/2 – 2 3 3/8 7 3/4 13 3/4 2 5/8 8 3/4 3 1/2 2 5/8 5/8 3/4
CX12-0261 0 – 1 3 5/8 9 1/2 17 3/8 3 1/2 8 3/4 4 1/2 3 3/4 1
CX12-0262 2 3/4 – 1 1/2 3 5/8 9 1/2 17 3/8 3 1/2 9 1/4 4 1/2 3 3/4 1 40
CX12-0263 1 1/4 – 2 3 5/8 9 1/2 17 3/8 3 1/2 9 3/4 4 1/2 3 3/4 1
CX12-0264 2 – 2 3/4 3 5/8 9 1/2 17 3/8 3 1/2 10 1/2 4 1/2 3 3/4 1
CX12-0265 3/16 – 1 1/4 4 3/8 11 1/2 20 1/8 3 1/2 9 1/4 4 1/2 3 1/4 1 1/2 1
CX12-0266 4 1 – 2 4 3/8 11 1/2 20 1/8 3 1/2 10 4 1/2 3 1/4 1 1/2 1 50
CX12-0267 2 4 3/8 11 1/2 20 1/8 3 1/2 11 4 1/2 3 1/4 1 1/2 1
CX12-0268 3 – 4 4 3/8 11 1/2 20 1/8 3 1/2 12 4 1/2 3 1/4 1 1/2 1
CX12-0269 1/4 – 1 3/8 4 7/8 12 3/8 20 7/8 3 1/2 10 3/4 4 3/4 3 3/4 1 1/2 1
CX12-0270 6 1 – 2 1/8 4 7/8 12 3/8 20 7/8 3 1/2 11 1/2 4 3/4 3 3/4 1 1/2 1 72
CX12-0271 2 – 3 1/8 4 7/8 12 3/8 20 7/8 3 1/2 12 1/2 4 3/4 3 3/4 1 1/2 1
CX12-0272 3 – 4 1/8 4 7/8 12 3/8 20 7/8 3 1/2 13 1/2 4 3/4 3 3/4 1 1/2 1
CX12-0273 3/8 – 1 1/2 5 3/8 12 3/4 22 5/8 3 3/4 12 1/8 5 1/4 4 1/4 2 1 1/2
CX12-0274 8 1 – 2 1/8 5 3/8 12 3/4 22 5/8 3 3/4 13 5 1/4 4 1/4 2 1 1/2 93
CX12-0275 2 – 3 1/8 5 3/8 12 3/4 22 5/8 3 3/4 14 5/8 5 1/4 4 1/4 2 1 1/2
CX12-0276 3 – 4 1/8 5 3/8 12 3/4 22 5/8 3 3/4 15 5/8 5 1/4 4 1/4 2 1 1/2

12, 16, 20, 25, 30 and 50 Ton capacities available upon request.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

 

Model JPA incorporates a pivoting shackle that permits side loading of the lifting shackle at 100 percent of rated capacity from vertical to 30 degrees, 75 percent of rated capacity between 30 and 45 degrees and 50 percent of rated capacity between 45 and 90 degrees.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

RUD VLBG Ring Bolt, metric fine thread with max length

RUD VLBG Ring Bolt, metric fine thread with max length

Product Features: Large WLL range Captive but exchangeable RUD-Bolt with special corrosion protection Corrud-DT The clamping spring achieves noise reduction and keeps the suspension ring in the desired direction; thereby simple hinging of the lifting means is possible...

RUD VLBG Load ring, metric thread

RUD VLBG Load ring, metric thread

Product Features: Large WLL range Captive but exchangeable RUD-Bolt with special corrosion protection Corrud-DT The clamping spring achieves noise reduction and keeps the suspension ring in the desired direction; thereby simple hinging of the lifting means is possible...

RUD VLBG – metric thread with max length, with locknut and washer

RUD VLBG – metric thread with max length, with locknut and washer

Product Features: Large WLL range Captive but exchangeable RUD-Bolt with special corrosion protection Corrud-DT The clamping spring achieves noise reduction and keeps the suspension ring in the desired direction; thereby simple hinging of the lifting means is possible...