Leading the lifting & rigging industry
Certex Logo

Categories

Pyramex® GL402C5 – Polyurethane A4 Cut – Work Gloves

Pyramex® GL402C5 - Polyurethane A4 Cut - Work Gloves

ANSI/ISEA 105-2016 – CUT A4 | PUNCTURE 4 | ABRASION 3
EN388: 2016 – 4X43D

Polyurethane palm coating // 13 gauge HPPE liner // Touch sensitivity // Low particulate shed // Sizes S-2XL
GL402C5


EMAIL PAGE

EMAIL PAGE


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

SVC-E Vertical Lifting Clamp

SVC-E Vertical Lifting Clamp

Range from 0.3t to 2.0t Lightweight clamp primarily designed for the vertical lifting of steel plates The spring-loaded tightening lock mechanism assures a positive initial clamping force even at no load condition The universal shackle allows the cam to generate a...

Tiger SCC Screw Cam Clamp

Tiger SCC Screw Cam Clamp

Universal clamp for lifting a large variety of different shaped steel; ranging from steel plates and structured steel to curved and spherical shaped steels This omni-directional clamp can lift, hang, turn over, and pull steel structures This clamp is equipped with a...

Tiger BCU Universal Beam Clamp

Tiger BCU Universal Beam Clamp

Full rated capacity at any lifting angle 2.0t, 3.0t, 5.0t and 10.0t capacities available *NEW* 10t deep flange option (to 40mm) Quick and versatile rigging point for hoisting equipment Low headroom design Highly flexible – for lifting, pulling or as a semi-permanent...

BCF Fixed Jaw Beam Clamp with Shackle

BCF Fixed Jaw Beam Clamp with Shackle

Range from 1.0t to 30.0t *NEW 6.0t and 10.0t models available to suit extra wide flange beams Quick and versatile rigging point for hoisting equipment Shackle suspension point Suitable for pulling and lifting at angles across the beam Up to 90° side loading with no...