Certex Logo

Categories

Pyramex – RVZ28 Series

Pyramex - RVZ28 Series


ANSI
Black trim // Clear chest pocket for badges with hook and loop closure // Tablet pockets (12″ x 7″) with hook and loop closures // Reach-through pocket on back with zipper closures // Metal grommets on upper front collar trim // Mic tab // Sizes M-5XL
RVZ2810 / RVZ2820

MATERIALS

Vest: 100% polyester, 105gsm polyester mesh
Pocket 100% polyester, 120gsm solid knit
Reflective Tape: Generic Silver

CLOSURE

Front: SBS Zipper
Zipper Tape: 100% polyester fabric
Zipper Teeth: Resin
Zipper Slider: Metal

REFLECTIVE STRIPING

One 2” stripe of reflective material applied horizontally 6” from bottom of vest
One 2” silver reflective stripe applied horizontally 3” from bottom stripe on back
One 2” silver reflective stripe applied horizontally 5.5” from top of shoulder on front
Two 2” silver reflective stripes run vertically from top of horizontal stripes

POCKETS

One reach through pocket on back with zipper closure: 23” x 12”
Two lower front pockets with flap hook and loop closure: 8.5” x 13”
One upper left chest double pocket divided into four parts: 5.5” x 5”
One upper right chest pocket with clear PVC front with flap closure: 4” x 7”
One inside lower left pocket with hook and loop closure: 13” x 7”
One inside lower right pocket with hook and loop closure: 13” x 7”
One inside upper left pocket with flap hook and loop closure: 4.4” x 6”

SPECIAL FEATURES

Double tacked 1” x 2.5” badge/mic holder located 4” from the center shoulder seam on both sides
Two metal grommets on upper front collar trim

VEST MEASUREMENTS

SIZE M L XL 2X 3X 4X 5X
CHEST MEASUREMENT 25” 26” 28.5” 30” 32” 34” 36”

Vest measurements are taken while garment is lying flat.
Please note: some size variation may occur.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Tiger TRCB Industrial Chain Block

Tiger TRCB Industrial Chain Block

Range from 500kg – 5.0t Meets or exceeds all international standards High quality alloy calibrated load chain Rugged steel body construction Drop forged & heat-treated alloy hooks Proof tested to 1.5 times rated capacity Lightweight and portable Safe reliable twin...

Tiger PROCB (TCB) Professional Chain Block

Tiger PROCB (TCB) Professional Chain Block

DNV GL Verification tested according to NORSOK R-002 Range from 250kg – 35.0t Available with slipping clutch overload protection Tested and certified for “fleeting”, “drifting” and “cross-hauling” applications up to 60° from the vertical without deration Available...

TAHS Pneumatic Air Hoist 250kg – 2t

TAHS Pneumatic Air Hoist 250kg – 2t

Range – 0.25 tonne to 2.0 tonne Reliable, fast, efficient, quiet and lightweight Greater than 5:1 factor of safety Suitable for Fleeting/Oblique pulling Certified for ATEX Category 3 – normal safety

Tiger TAH-M Twin Hook Air Hoist

Tiger TAH-M Twin Hook Air Hoist

TAH21M 2.0t/2.0t configuration TAH33M 3.0t/3.0t and 3.0t/6.0t configurations Two chain falls with hooks for alternate working Various hook options – standard, closed eye, grab and self-locking Integral load limiter Especially suitable for horizontal pulling Reliable,...