ANSI
Weather resistant 4-in-1 reversible windbreaker polyester jacket // Elastic band at wrists // Removable, zip-out sleeves – converts Class 3 jacket to Class 2 vest // Reverses from hi-vis lime to gray/black // Silver reflective tape on hi-vis side // Hi-vis reflective piping on gray/black side // Bottom hem adjustment — bungee cord/toggle pull // Mic tab on hi-vis side // Sizes M-5XL
Non-rated when reversed to all black side
RJ3410
| SIZE | M | L | XL | 2X | 3X | 4X | 5X |
|---|---|---|---|---|---|---|---|
| CHEST MEASUREMENT | 24″ | 25.5″ | 27″ | 29″ | 31″ | 33″ | 34.5″ |
Jacket measurements are taken while garment is lying flat. Please note: some size variation may occur.
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
DNV GL Verification tested according to NORSOK R-002 UK Network Rail PADS Certification Available with slipping clutch overload protection Range from 800kg – 20000kg Available with forged clevis adaptor components or shipyard hooks Equipped with our unique intelligent...
Range from 500kg – 5.0t Meets or exceeds all international standards High quality alloy calibrated load chain Rugged steel body construction Drop forged & heat-treated alloy hooks Proof tested to 1.5 times rated capacity Lightweight and portable Safe reliable twin...
DNV GL Verification tested according to NORSOK R-002 Range from 250kg – 35.0t Available with slipping clutch overload protection Tested and certified for “fleeting”, “drifting” and “cross-hauling” applications up to 60° from the vertical without deration Available...
Range – 0.25 tonne to 2.0 tonne Reliable, fast, efficient, quiet and lightweight Greater than 5:1 factor of safety Suitable for Fleeting/Oblique pulling Certified for ATEX Category 3 – normal safety
