Leading the lifting & rigging industry
Certex Logo

Categories

Harrington ER Electric Chain Hoists

Harrington ER Electric Chain Hoists

• Standard length of power supply cable is 15′. For more information on power supply system, contact the Harrington distributor nearest you.
• Special lengths of load chain, pushbutton cord or power supply cables are available upon request.
• Harrington load chain is casehardened Grade 80 chain.
• Optional canvas chain containers are available.
• Optional steel chain containers are available if lifting height exceeds limit of canvas chain container.


EMAIL PAGE

EMAIL PAGE


VIEW IN CATALOG

VIEW IN CATALOG


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

Cap. (Tons) CERTEX Cat. Ref. No. Harrington Product Code Standard Lift (Ft.) Push Button Cord 1 (Ft.) Lifting Speed (Ft./Min.) Lifting Motor 3 Phase 60 Hz. Load Chain Diameter (mm) x Chain Fall Lines Net Weight (Lbs.) Weight for Additional One Foot of Lift (Lbs.)
Output (Hp) Rated Current (amps)
@230V (208V) @460V
1/8 CX11-0571 ER001H — — 57 0.75 4.2 2.1 5.0 x 1 68 0.37
1/4 CX11-0572 ER003S — — 39 0.75 4.2 2.1 5.0 x 1 68 0.37
1/4 CX11-0573 ER003H — — 60 1.2 5.7 2.9 6.3 x 1 86 0.57
1/2 CX11-0574 ER005L — — 15 0.75 4.2 2.1 6.3 x 1 70 0.57
1/2 CX11-0575 ER005S — 7.2 30 1.2 5.7 2.9 6.3 x 1 86 0.57
1 CX11-0576 ER010L — — 16 1.2 5.7 2.9 8.0 x 1 90 0.93
1 CX11-0577 ER010S 10 — 29 2.4 10.5 5.3 8.0 x 1 134 0.93
1 1/2 CX11-0578 ER015S — — 20 2.4 10.5 5.3 10.0 x 1 150 1.5
2 CX11-0579 ER020L — — 14 2.4 10.5 5.3 10.0 x 1 150 1.5
2 CX11-0580 ER020S — — 28 4.7 18.3 9.2 10.0 x 1 238 1.5
2 1/2 CX11-0581 ER025S — — 23 4.7 18.3 9.2 11.2 x 1 249 1.9
3 CX11-0582 ER030L — 8.2 16 4.7 18.3 9.2 12.5 x 1 256 2.3
3 CX11-0583 ER030S — — 22 6.2 25.1 12.6 12.5 x 1 269 2.3
5 CX11-0584 ER050L — — 12 4.7 18.3 9.2 11.2 x 2 308 4.0

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

dynarope® HF37 dynarope® Tensiometer

dynarope® HF37 dynarope® Tensiometer

The dynarope® tension meter is a precision device for measuring forces in a tensioned cable or rope. The meter can be attached directly to the cable and has a fixed display.

When the tension meter is placed on a tensioned cable, the load cell will generate a signal which is more or less proportional to the force.

The HF 37 series can be connected to a PC for managing and storing measurement results.

There is a large variety of cables, each cable having its own characteristics such as composition, diameter, rigidity, density, etc. The database includes several basic wire rope data. We are happy to help you choose the right model and parameter settings in our wire rope database.

dynarope® HF 36 – Tensiometer

dynarope® HF 36 – Tensiometer

The dynarope® HF 36 is an electronic load cell that has been designed to measure the effort applied in a wire rope. The resulting signal is used in a digital remote display (model HF 87/T/LPT) controlled by a microprocessor, which corrects the force information according to the wire rope specification and displays the result of the measurement on a LCD display.

Several wire ropes specifications are logged in a data bank.

dynasafe® HF 05 Tension Load Limiting Cell

dynasafe® HF 05 Tension Load Limiting Cell

The dynasafe® HF 05 mechanical load cell has been designed to provide a trip point in lifting systems, which have a dead-end wire rope. The trip point load limiter generates an “all or nothing” type signal in the event the programmable target value is exceeded.  Available in one or two thresholds versions.

The load cell is preferable for fitting applications where it is essential to minimize the lost headroom.

dynafor® Expert- sensor only – capacity from 1/2 t to 10 t. Accuracy: +/- 0.1% dynamometer

dynafor® Expert- sensor only – capacity from 1/2 t to 10 t. Accuracy: +/- 0.1% dynamometer

The Dynafor® Expert, designed and manufactured by Tractel, is a wireless digital dynamometer, used in high precision applications. With its unique design, it allows to reach extreme precision.
Based on the principle of strain gauge extension measurement, the sensor generates an electrical signal which is processed and analyzed by a built-in microprocessor, which transmits the information to a wireless accessory.

Equipped with radio 2.4 GHz (RF) and Bluetooth (BLE) chipsets available all time, the Dynafor® Expert provides a wireless range of 1,300 ft. (400 m) to Tractel Dynafor® HHD, large displays AL128 and software accessories 100 ft. (30 m) to any smartphone equipped with our free Dynafor® app on iOS or Android
Compatible with standard bow and clevis shackles, the Dynafor® Expert ensures a perfect implementation in your applications.