Petzl AVAO® BOD FAST Fall-Arrest and Work Positioning and Suspension Harness

Comfortable Harness for Fall Arrest, Work Positioning, and Suspension

The AVAO BOD FAST fall-arrest, work positioning and suspension harness is designed for greater comfort in all situations. The wide, semi-rigid waistbelt and leg loops provide excellent support. Its lightweight, breathable construction maximizes air flow. The shoulder straps have a system for stowing the fall-arrest lanyard connectors and keeping them within reach. The DOUBLEBACK self-locking buckles at the rear of the harness, between the waistbelt and the leg loops, allow for a shorter adjustment when the dorsal attachment point is used. The harness also makes it easier to carry and organize work tools, with multiple gear loops and slots for attaching CARITOOL tool holders and TOOLBAG tool pouches. The harness has an integrated fall indicator on the dorsal attachment point and is fastened with a TRIACT-LOCK automatic locking carabiner. It is certified to North American and European standards. The AVAO BOD FAST features leg loops with FAST buckles.

EMAIL PAGE

WARNINGS & CAUTIONS

Description

Comfortable throughout the workday:
– Wide, semi-rigid waistbelt and leg loops for excellent support and lightweight, breathable construction to maximize air flow
– Padded shoulder straps are widely spaced to reduce neck chafing and help distribute the load over the shoulders when the waistbelt is loaded
Easy to adjust:
– Waistbelt and shoulder straps equipped with self-locking DOUBLEBACK buckles for quick and easy adjustment
– Leg loops equipped with FAST buckles for quick and easy fastening and unfastening without loss of adjustment, even while wearing gloves
– Stowing system for the MGO connectors on fall-arrest lanyards, on each shoulder strap, allows the user to be unhindered by the lanyard and keep the connectors within reach; in the event of a fall, the system releases the MGO connectors and allows the absorber to be deployed
– Side attachment points can be folded down to prevent accidental snagging when not in use
– DOUBLEBACK self-locking buckles at the rear of the harness, between the waistbelt and the leg loops, make it possible to adjust for use on the dorsal attachment point; in the event of a fall on this point, a shorter adjustment allows the weight to be taken up on the leg loops so that the user may remain more comfortably suspended while awaiting rescue
Easy to carry and organize tools:
– Six pre-shaped equipment loops with protective sheath
– Two slots for CARITOOL tool holder
– Four slots for TOOLBAG tool pouch
The international version has a fall indicator: a red strap appears on the dorsal attachment point after a fall to indicate that the harness should be retired

Specifications

Ventral attachment point: Attachment for a descender or a positioning lanyard for use in single mode
Lateral attachment points: Attachment for a positioning lanyard for use in double mode
Sternal attachment point: Fall-arrest system attachment
Dorsal attachment point: Fall-arrest system attachment
Rear attachment point on the waistbelt: Restraint lanyard attachment
Certification(s): ANSI Z359.11, NFPA 2500 classe III, CSA Z259.10, CE EN 361, CE EN 358, CE EN 813, GB 6095-2021: Q/W/Z
Material(s): Nylon, polyester, aluminum, steel

References

References	C071DA00	C071DA01	C071DA02	C071DA03	C071DA04	C071DA05
Color(s)	Black/Yellow	Black/Yellow	Black/Yellow	Black	Black	Black
Size	0	1	2	0	1	2
Waist belt	65-80 cm	70-93 cm	83-120 cm	65-80 cm	70-93 cm	83-120 cm
Leg loops	44-59 cm	47-62 cm	50-65 cm	44-59 cm	47-62 cm	50-65 cm
Stature	160-180 cm	165-185 cm	175-200 cm	160-180 cm	165-185 cm	175-200 cm
Weight	2350 g	2400 g	2485 g	2350 g	2400 g	2485 g
Guarantee	3 years	3 years	3 years	3 years	3 years	3 years
Inner Pack Count	1	1	1	1	1	1

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Caldwell Motorized Rotating Crane Hook Clevis Style Model 250

Motorized Rotating Crane Hooks make rotating loads on the crane hook easy for the operator. Each unit is custom designed per your requirements. Product Features: Sheave pin includes lubrication fittings External lubrication on heavy duty thrust bearing Heavy duty worm...

Caldwell Motorized Rotating Crane Hook Clevis Style Model 50

Put the power and control in the crane operator's skilled, capable hands with the Caldwell Motorized Rotating Crane Hook. With full 360-degree rotation, the operator can place loads in tough to reach or access locations with ease, orienting them exactly right. Product...

Caldwell Weld On Bucket Hook Model WBH

Turn your excavating equipment into a reliable lifter with this weld-on hook. Carefully follow welding instructions for best results. Product Features: Latch prevents accidental unhooking of load Latch is resistant to dirt, concrete, and ice Stainless steel latch...

Caldwell Unilink Combination Triangle/Choker Model UL

Product Features: Forged steel Large crane hook opening for easier rigging Web-Trap design Functions as both triangle and choker Plated for corrosion resistance Use with only one or two ply web slings Use with roundslings up to 5,300 pound rated capacity Complies with...

Categories