Leading the lifting & rigging industry
Certex Logo

Categories

Safety Pin Shackle – No. 320

Safety Pin Shackle - No. 320
  • Skookum Gold Standard Forgings
  • All sizes are forged, quenched and tempered.
  • Enamel, zinc plate or galvanized finish.
  • Custom sizes & materials (stainless steel, etc.) are available upon request.
  • Superior strength, hardness & uniformity.
  • Size & working load permanently imprinted.
  • Material heat codes imprinted on bale and pin.

EMAIL PAGE

EMAIL PAGE


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

SIZE
(lNCHES)		 WLL1
(TONS) 		 WEIGHT2
(LBS.)		 STOCK # DIMENSIONS (IN)
#320 D W L B R P
1/2 5.00 1.00 632004 0.63 0.81 ± .125 1.88 ± .125 1.28 1.44 0.63
5/8 7.00 2.00 632005 0.75 1.06 ± .0625 2.50 ± .125 1.75 1.63 0.75
3/4 9.00 3.00 632006 0.88 1.25 ± .0625 2.88 ± .25 2.00 1.84 0.88
7/8 12.00 4.00 632007 1.00 1.44 ± .0625 3.31 ± .25 2.28 2.13 1.00
1 16.00 5.50 632008 1.13 1.69 ± .0625 3.75 ± .25 2.69 2.25 1.13
1 1/8 18.00 8.00 632009 1.13 1.81 ± .0625 4.25 ± .25 2.94 2.63 1.25
1 1/4 21.00 11.00 632010 1.25 2.03 ± .0625 4.63 ± .25 3.25 3.00 1.38
1 3/8 26.00 14.00 632011 1.38 2.25 ± .125 5.25 ± .25 3.63 3.25 1.50
1 1/2 31.00 18.00 632012 1.50 2.38 ± .125 5.75 ± .25 3.88 3.44 1.63
1 5/8 35.00 23.00 632013 1.63 2.63 ± .125 6.25 ± .25 4.63 4.00 1.75
1 3/4 41 .00 30.00 632014 1.75 2.88 ± .125 7.00 ± .25 5.00 4.25 2.00
2 52.00 42.00 632016 2.00 3.25 ± .125 7.75 ± .50 5.75 5.00 2.25
2 1/4 67.00 57.00 632018 2.25 3.88 ± .125 9.25 ± .50 6.50 5.50 2.50
2 1/2 82.00 85.00 632020 2.50 4.13 ± .125 10.50 ± .50 7.25 5.88 2.75
2 3/4 104.00 100.00 632022 2.75 4.50 ± .125 11.50 ± .75 7.50 6.25 3.00
3 117.0 136.00 632024 3.00 5.00 ± .125 13.00 ± .75 7.88 6.50 3.25
3 1/2 150.00 256.00 632028 3.50 5.75 ± .25 15.00 ± .75 9.50 8.00 3.75
4 175.00 310.00 632032 4.00 6.55 ± .25 17.00 ± .75 11.00 9.25 4.25

1 Ton=2,00lbs – Design factor is 5 to 1.
2 Weights vary slightly with style of shackle pin used. Specifications subject to change without notice.

WARNING: Misuse of rigging equipment can result in serious injury up to and including loss of life. Only competent trained professionals should use Skookum products.
Thoroughly inspect oil equipment before each and every use and never use damaged or worn products. Skookum disclaims any lability resulting from the misuse of its products. Please take a moment to carefully review our maintenance and warnings page for more information.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

SVC-E Vertical Lifting Clamp

SVC-E Vertical Lifting Clamp

Range from 0.3t to 2.0t Lightweight clamp primarily designed for the vertical lifting of steel plates The spring-loaded tightening lock mechanism assures a positive initial clamping force even at no load condition The universal shackle allows the cam to generate a...

Tiger SCC Screw Cam Clamp

Tiger SCC Screw Cam Clamp

Universal clamp for lifting a large variety of different shaped steel; ranging from steel plates and structured steel to curved and spherical shaped steels This omni-directional clamp can lift, hang, turn over, and pull steel structures This clamp is equipped with a...

Tiger BCU Universal Beam Clamp

Tiger BCU Universal Beam Clamp

Full rated capacity at any lifting angle 2.0t, 3.0t, 5.0t and 10.0t capacities available *NEW* 10t deep flange option (to 40mm) Quick and versatile rigging point for hoisting equipment Low headroom design Highly flexible – for lifting, pulling or as a semi-permanent...

BCF Fixed Jaw Beam Clamp with Shackle

BCF Fixed Jaw Beam Clamp with Shackle

Range from 1.0t to 30.0t *NEW 6.0t and 10.0t models available to suit extra wide flange beams Quick and versatile rigging point for hoisting equipment Shackle suspension point Suitable for pulling and lifting at angles across the beam Up to 90° side loading with no...