Certex Logo

Categories

Flex-X 19 Crane Rope

Flex-X 19 Crane Rope

Ideal for multipart hoist lines wherever you encounter spooling problems, drum crushing, block twisting or have fast line speeds.

  • More crushing resistance than standard 19 x 7 rope
  • Higher strength-to-diameter resistance to bending fatigue
  • Exceptional stability

Flex-X 19 icons
Flex-X 19 icons 2

Diameter Range 7/16″ – 5/8″ 3/4″ – 1-1/8″
Number of Outer Strands 12 12
Number of Wires Per Strand 7 19
Wire Pattern Seale
Diameter Tolerance -0%, +5% -0%, +5%

Flex-X 19 Strength and Weights Chart (inches)

Diameter
(in)
Approx.
wt./ft. (lbs.)
Minimum Breaking Force
(tons of 2000 lbs)*
7/16 0.43 11.2
1/2 0.49 14.6
9/16 0.65 18.5
5/8 0.78 22.7
3/4 1.16 32.4
7/8 1.58 43.8
1 2.05 56.9
1 1/8 2.57 71.5

* The minimum breaking force applies only when a test is conducted with both ends fixed. When in use, the minimum breaking force of these ropes may be significantly reduced if one end is free to rotate.

Special constructions and diameters available upon request – please contact us directly.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Caldwell Adjustable Lifting Beam, Economy Model 17

Caldwell Adjustable Lifting Beam, Economy Model 17

Model 17 Adjustable Lifting beam features an adjustable bail and lifting points in 6" incerments to handle standard and unbalanced loads. Get the set-up you need with a few quick motions. Features: Bail adjusts horizontally for lifting unbalanced loads Provides...

Caldwell Dura-Lite Composite Adjustable Lifting Beams Model 416

Caldwell Dura-Lite Composite Adjustable Lifting Beams Model 416

Dura-Lite Model 416 is the composit version of Caldwell's Model 16 Adjustable Lifting Beam. Choose for corrosive enviroments, areas where sparks are a concern, or when a lighter beam allows you to pick a heavier load. Features: Lightweight beam gives you additional...

Caldwell Die Lifting Tongs Model DLT

Caldwell Die Lifting Tongs Model DLT

Support Tongs are used for repeat pickups of constant-sized containers such as boxes and crates. The arm design allows significant height on the lifted item and the Auto-Latch mechanism allows the operator to position, engage, lift, move, place, and disengage the...

Caldwell Dixon Coil Hook with Pivoting Wedge Model 80H

Caldwell Dixon Coil Hook with Pivoting Wedge Model 80H

It's all about the pivoting wedge on this unit. By maneuvering that wedge in between two stacked coils, an operator can separate them and begin a tilt, allowing the rest of the hook to slide in and do its job. Features: Easy horizontal to vertical upending of coils...