Certex Logo

Categories

Dynamiclift Magnet 150 LB

Dynamiclift Magnet 150 LB

These lightweight and powerful rare earth permanent lift magnets can be used on flat or round surfaces and contain an internal release on/off device that does not contact or damage the surface of the part being lifted. DynamicLifts™ also offers excellent holding on thin gauge ferrous metals to comparable rare earth lift magnets.

CERTEX Cat. Ref. No. HEIGHT (IN) LENGTH (IN) WEIGHT (LBS) BAIL HEIGHT (IN) BAIL THICKNESS (IN) BAIL WIDTH (IN) WLL (LBS) HANDLE LENGTH (IN) MAGNET HEIGHT (IN) MAGNET LENGTH (IN) MAGNET WIDTH (IN) MAGNET POLE QUALITY
DL0150 10 5 6.1 2.25 0.25 3 150 2.5 2.75 3 2.5 2
  • On/Off Permanent Rare Earth Magnet
  • Handle Locks in the On Position
  • Lifts Flat or Round Loads
  • Easy Internal Manual Release Does Not Contact the Load
  • Large swivel lift lug
  • Heat Resistant Up To 180°F (82°C)
  • 3:1 Design Factor
  • Conforms To ASME B30.20 Standard

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Elephant DA / DB Type Electric Chain Hoist

Elephant DA / DB Type Electric Chain Hoist

DA TYPE : 1 SPEED, 3 PHASE SINGLE VOLTAGE DB TYPE: 2 SPEED, 3 PHASE SINGLE VOLTAGE An efficient motor that offers high lift speeds Quiet operation with a sealed protective body against dust Solid steel side plates for a rugged heavy duty construction Highly durable...

Elephant Beta Compact Electric Chain Hoist

Elephant Beta Compact Electric Chain Hoist

120kg & 200kg 1 Phase 115V Unit weight with standard lift is 10 lbs 11” headroom Ideal for carrying in tool boxes Overload protection device Overwind protection Plastic chain container Ratings JIS / ISO 1AM, FEM M4, ASME H3, Hoist protection is IP54, Pendant is...

Elephant Alpha Series Compact Electric Chain Hoist Single Phase

Elephant Alpha Series Compact Electric Chain Hoist Single Phase

The aluminum die cast body is designed for environments where noise levels must be kept to a minimum Compact design with low headroom, net weight of the hoists range from 32 lbs. with a standard 10’ lift Alpha S series has a single brake design Overload and overwind...

Elephant Super 100 Manual Chain Hoist Overload Protection

Elephant Super 100 Manual Chain Hoist Overload Protection

0.5t ~ 10 ton Overload protection safety device Grade 105 galvanized load chain, which adheres to the strict German DIN 5684 standard Galvanized hand chain Double pawls supporting fail-safe brake mechanism Load sheave with roller bearing The tough reinforced gear case...