High load capacity, bow shackle (grade 8) with safety bolt and fixed nut for use under low temperatures
Productcode
P-6011
Material
bow and pin alloy steel, Grade 8, quenched and tempered
Safety factor
MBL equals 5 x WLL
Finish
shackle bow painted silver, pin painted green (120 tons shackle is hot dipped galvanized)
Temp. range
-40°C up to +200°C
Certification
2.1
2.2
3.1
MTCa
MTCb
LROS
MPIa
USa
CE
| Article code | working load limit (ton) | Weight shackle pin (kg) | diameter bow (mm) A  |
diameter pin (mm) B |
diameter eye (mm) C |
width eye (mm) D |
width inside (mm) E |
length inside (mm) F |
width bow (mm) G |
length (mm) H |
length bolt (mm) I |
width (mm) J |
thickness nut (mm) K |
securing bolt thread (mm) L |
securing bolt length (mm) M |
Torque (nm) | Net weight (KG) | |
| HDPOHM0120FN | 120 | 28,12 | 95 | 95 | 204 | 95 | 147 | 400 | 238 | 644 | 453 | 428 | 50 | M12 | 150 | 75 | 110 | |
| HDPOHM0150FN | 150 | 39,15 | 105 | 108 | 235 | 105 | 169 | 410 | 275 | 686 | 496 | 485 | 50 | M12 | 160 | 75 | 160 |
| Article code | working load limit (ton) | Weight shackle pin (LB) | diameter bow (inch) A |
diameter pin (inch) B |
diameter eye (inch) C |
width eye (inch) D |
width inside (inch) E |
length inside (inch) F |
width bow (inch) G |
length (inch) H |
length bolt (inch) I |
width (inch) J |
thickness nut (inch) K |
securing bolt thread (inch) L |
securing bolt length (inch) M |
Torque (nm) | Net weight (LBS) | |
| HDPOHM0120FN | 120 | 61,99 | 3 3/4 | 3 3/4 | 8 1/32 | 3 3/4 | 5 25/32 | 15 3/4 | 9 3/8 | 25 11/32 | 17 27/32 | 16 27/32 | 1 31/32 | M12 | 5 29/32 | 75 | 243 | |
| HDPOHM0150FN | 150 | 86,31 | 4 1/8 | 4 1/4 | 9 1/4 | 4 1/8 | 6 21/32 | 16 5/32 | 10 13/16 | 27 | 19 17/32 | 19 3/32 | 1 31/32 | M12 | 6 5/16 | 75 | 353 |
The Green Pin Polar® Heavy Duty Bow Shackle FN is a high load capacity, bow shackle with a safety bolt and a fixed nut. The shackle can be used in extreme climatic conditions, down to -40°C (-40°F). It is the perfect choice when the load is dynamic or exposed to extreme vibrations because of its triple safety (split pin, safety bolt and fixed nut). The fixed nut of the Green Pin Polar® Heavy Duty Bow Shackle FN is drilled through both the shackle nut and pin and is firmly attached to the pin head with bolts and Nord-Lock® washers. The shackle conforms to a wide range of certifications. The Green Pin Polar® Heavy Duty Bow Shackle FN is suitable for both one-leg systems and multi-leg systems and is available with a working load limit of 120t or 150t.
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Range from 500kg – 5.0t Meets or exceeds all international standards High quality alloy calibrated load chain Rugged steel body construction Drop forged & heat-treated alloy hooks Proof tested to 1.5 times rated capacity Lightweight and portable Safe reliable twin...
DNV GL Verification tested according to NORSOK R-002 Range from 250kg – 35.0t Available with slipping clutch overload protection Tested and certified for “fleeting”, “drifting” and “cross-hauling” applications up to 60° from the vertical without deration Available...
Range – 0.25 tonne to 2.0 tonne Reliable, fast, efficient, quiet and lightweight Greater than 5:1 factor of safety Suitable for Fleeting/Oblique pulling Certified for ATEX Category 3 – normal safety
TAH21M 2.0t/2.0t configuration TAH33M 3.0t/3.0t and 3.0t/6.0t configurations Two chain falls with hooks for alternate working Various hook options – standard, closed eye, grab and self-locking Integral load limiter Especially suitable for horizontal pulling Reliable,...
