Leading the lifting & rigging industry
Certex Logo

Categories

Modulift MOD 6 Spreader Beam

Modulift MOD 6 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links,
with intermediate struts that can be bolted into the assembly to achieve dierent spans.
MOD 6 has an assembled span ranging from 16 inches to 176 inches in 4 inch increments.


EMAIL PAGE

EMAIL PAGE


VIEW IN CATALOG

VIEW IN CATALOG


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

  • Rated at 6 tonnes SWL at 112 inch span.
    (60° BSA). See Load Table for SWL at longer spans.
  • ‘Base to Sling’ angle, α, 45 degrees or more.
  • End Units & Drop Links are rated at 3 tonnes WLL each (6 tonnes combined capacity)
  • Bolt tightening torque: 44 Pound-Foot. Spanner size required: 17mm
  • Recommended additional equipment: Torque Wrench, Podger Spanner and Ring Spanner

Part Ref. Description Weight/item
P1 End Unit 7 lbs
P2 Drop Link 1.3 lbs
P3 40″ Strut 18 lbs
P4 24″ Strut 12 lbs
P5 12″ Strut 8 lbs
P6 8″ Strut 6 lbs
P7 4″ Strut 5 lbs
P8 4.75t Shackle 2.6 lbs
P9 3.25t Shackle 1.6 lbs
P10 M10 x 30, Grade 8.8, HT Bolts, Nuts & Washers

● Personnel using this system should be suitably trained, competent and have a clear understanding of Safe Slinging procedures.

● The use of Modulift equipment must be in accordance with the procedures laid down in ‘ASME B30.20 – 2013’.

● Never exceed stated SWL – Adhere to SWL in Table 2 for particular sling angle used.

● The top sling length is critical to the safe use of the spreader – Adhere to Table 2.

● Ensure Drop Links hang down, and smaller shackles are connected to bottom hole of Drop Link.

● Do not under any circumstances hang load(s) from the tube or anges – the spreader is designed for axial compression, not bending.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Elephant DA / DB Type Electric Chain Hoist

Elephant DA / DB Type Electric Chain Hoist

DA TYPE : 1 SPEED, 3 PHASE SINGLE VOLTAGE DB TYPE: 2 SPEED, 3 PHASE SINGLE VOLTAGE An efficient motor that offers high lift speeds Quiet operation with a sealed protective body against dust Solid steel side plates for a rugged heavy duty construction Highly durable...

Elephant Beta Compact Electric Chain Hoist

Elephant Beta Compact Electric Chain Hoist

120kg & 200kg 1 Phase 115V Unit weight with standard lift is 10 lbs 11” headroom Ideal for carrying in tool boxes Overload protection device Overwind protection Plastic chain container Ratings JIS / ISO 1AM, FEM M4, ASME H3, Hoist protection is IP54, Pendant is...

Elephant Alpha Series Compact Electric Chain Hoist Single Phase

Elephant Alpha Series Compact Electric Chain Hoist Single Phase

The aluminum die cast body is designed for environments where noise levels must be kept to a minimum Compact design with low headroom, net weight of the hoists range from 32 lbs. with a standard 10’ lift Alpha S series has a single brake design Overload and overwind...

Elephant Super 100 Manual Chain Hoist Overload Protection

Elephant Super 100 Manual Chain Hoist Overload Protection

0.5t ~ 10 ton Overload protection safety device Grade 105 galvanized load chain, which adheres to the strict German DIN 5684 standard Galvanized hand chain Double pawls supporting fail-safe brake mechanism Load sheave with roller bearing The tough reinforced gear case...