Leading the lifting & rigging industry
Certex Logo

Categories

Modulift MOD 34 Spreader Beam

Modulift MOD 34 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links,
with intermediate struts that can be bolted into the assembly to achieve dierent spans.
MOD 34 has an assembled span ranging from 3ft to 32ft in 1ft increments.


EMAIL PAGE

EMAIL PAGE


VIEW IN CATALOG

VIEW IN CATALOG


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

  • Rated at 34 tonnes SWL at 16ft span
    (60° BSA). See Load Table for SWL at longer spans.
  • ‘Base to Sling’ angle, α, 45 degrees or more.
  • End Units & Drop Links are rated at 17 tonnes WLL each (34 tonnes combined capacity).
  • Bolt tightening torque: 110 Pound-Foot. Spanner size required: 30mm.
  • Recommended additional equipment: Torque Wrench, Podger Spanner and Ring Spanner.

Part Ref. Description Weight/item
P1 End Unit 49 lbs
P2 Drop Link 15 lbs
P3 6ft Strut 103 lbs
P4 4ft Strut 71 lbs
P5 2ft Strut 48 lbs
P6 1ft Strut 34 lbs
P7 25t Shackle 31 lbs
P8 17t Shackle 18 lbs
P9 M20 x 50, Grade 8.8, HT Bolts, Nuts & Washers

● Personnel using this system should be suitably trained, competent and have a clear
understanding of Safe Slinging procedures.
● The use of Modulift equipment must be in accordance with the procedures laid down in
‘ASME B30.20 – 2013’.
● Never exceed stated SWL – Adhere to SWL in Table 2 for particular sling angle used.
● The top sling length is critical to the safe use of the spreader – Adhere to Table 2.
● Ensure Drop Links hang down, and smaller shackles are connected to bottom hole of Drop Link.
● Do not under any circumstances hang load(s) from the tube or anges – the spreader is designed for
axial compression, not bending.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Modulift MOD 400/600 Spreader Beam

Modulift MOD 400/600 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. MOD 400/600 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/500 Spreader Beam

Modulift MOD 400/500 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/500 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/400 Spreader Beam

Modulift MOD 400/400 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/400 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 250/400 Spreader Beam

Modulift MOD 250/400 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 250/400 has an assembled span ranging from 6ft to 68ft in 1ft...