Leading the lifting & rigging industry
Certex Logo

Categories

Anver Eight Pad Lifting Frames – 2,100lb (953 kg) Capacity

Anver Eight Pad Lifting Frames - 2,100lb (953 kg) Capacity
  • ANVER’S Standard Vacuum Lifters offer efficient material handling solutions by promoting functionality, safety, and ergonomic operations for a wide variety of applications and materials.
  • Standard lifting frames are built to order from stock using modular components, so there are hundreds of possible combinations depending on the vacuum generator, beam, crossarms, and vacuum cups selected.
  • ISO 9001 Certified

EMAIL PAGE

EMAIL PAGE


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

Lifting Frame Number L210M8-110-4/44
Rated Load Capacity [lbs (kg)] 2100 (953)
Unit Weight [lbs (kg)] 250 (113)
A Lifting Frame Headroom [in. (mm)] 10 (254)
B Spreader Beam Length [in. (mm)] 112 (2845)
C Hardware Mounting Centers [in. (mm)] 9 (229)
D Pad Diameter [in. (mm)] 9.13 (232)
E Outer Pad Distances Maximum [in. (mm)] 117 (2972)
E Outer Pad Distances Minimum [in. (mm)] 53 (1346)
F Minimum Inner Pad Distance [in. (mm)] 34 (864)
G Crossarm Length [in. (mm)] 44 (1118)
H Outer Pad Distances Maximum [in. (mm)] 50 (1270)
H Outer Pad Distances Minimum [in. (mm)] 23 (584)
Maximum Sheet Size [ft (M)] 12 x 6 (3.7 x 1.8)
Seal Number SSR-92

Crossarms and vacuum pads in maximum position to handle maximum plate size.
Crossarms can pivot to near parallel with spreader beam to handle narrow plates.
Vacuum pads and crossarms fully adjustable to handle short and narrow plates.
Inner crossarms and vacuum pads (1/2 capacity) for use with smaller plates. Outer pads provided with shut-off valves.

Basic features on ANVER’s Standard Horizontal Vacuum Lifters include: vacuum leakage
sensor and warning system; attach/release slide valve with safety lock; and locking hand
knobs on the adjustable vacuum pad, slide assemblies, and crossarms (when applicable).

ANVER Vacuum Lifters comply fully with and meet the standards of US ANSI ASME Standard
B30.20 for below-the-hook lifting devices, as well as complying with OSHA and most
European requirements.

The L210M8-110-4/44 eight-pad lifting frame is ideal for handling carbon steel and stainless
steel sheets and plates with a maximum capacity of 2100 lb (953 kg). The type of
vacuum lifter – Mechanical, Air, or Electric – paired with the number of pads used will depend
on your application needs. Foam pads are not available for mechanical vacuum generators.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Anver Vacuum Leakage Sensing System

Anver Vacuum Leakage Sensing System

ANVER’s Improved, Rechargeable VLS System VLS system now comes equipped with both a rechargeable on board battery (OBB) in addition to the existing 9v battery back up (BBU) for added security and convenience! The VLS monitors vacuum level of various systems. If the...

Anver Slip-on Seals

Anver Slip-on Seals

ANVER’s aluminum vacuum pads with SSR-Series slip-on seals have been designed using 50+ years of experience in the vacuum handling field, making them some of the most versatile and high performance vacuum cups available. ISO 9001 Certified

Anver Parking Stands for Small Vacuum Lifters

Anver Parking Stands for Small Vacuum Lifters

Adjustable in Four Positions: Pull Sideways, Turn, Let Go and it Locks in Position. Spring-Loaded Locking Mechanism Snaps into Position for One-sided, Quick Adjustments ANVER Spring-Loaded, Adjustable, Four Position Parking Stands keep the vacuum sealing rings clean...

Anver M150M & M250M Mechanical Vacuum Generators

Anver M150M & M250M Mechanical Vacuum Generators

ANVER Self-Powered Mechanical Vacuum Lifters can be outfitted with a variety of Interchangeable Vacuum Pads and Vacuum Attachments for a wide range of material handling applications. Various single and multiple pad configurations can be installed on most of our...