Leading the lifting & rigging industry
Certex Logo

Categories

9-Part Braided Slings

9-Part Braided Slings

Multi-part braided slings are fabricated by taking a single long length of rope and braiding it back & forth along the entire design length, including the eyes, to form a single high-capacity sling.

These braids achieve capacities & flexibility far greater than single-part slings of the same diameter wire rope, and in the case of 9-part slings, the capacity increase is significant.

Pictured is a 2-3/4″ x 50′, 500T Vertical 9-part braids in fabrication at Certex USA – Yarbrough Cable – Memphis, TN.


EMAIL PAGE

EMAIL PAGE


VIEW IN CATALOG

VIEW IN CATALOG


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

COMPONENT ROPE OR CABLE DIAMETER (INCHES) VERTICAL CHOKER VERTICAL BASKET
Component: 7×19 Galvanized Aircraft Cable
3/32 0.63 0.55 1.3
1/8 1.3 1.1 2.5
3/16 2.6 2.3 5.3
1/4 4.4 3.9 8.8
5/16 6.2 5.4 12.3
3/8 9.1 7.9 18.1
Component: 6×19, 6×36 IWRC Wire Rope
EIPS EEIPS EIPS EEIPS EIPS EEIPS
1/4 4.3 4.7 3.7 4.1 8.6 9.4
5/16 6.6 7.3 5.8 6.4 13 15
3/8 10 10 8.3 9.2 19 21
7/16 13 14 11 12 26 28
1/2 17 18 15 16 34 37
9/16 21 23 19 20 42 47
5/8 26 29 23 25 52 57
3/4 37 41 32 36 74 82
7/8 50 55 44 48 100 110
1 65 72 57 63 130 143
1-1/8 82 90 72 79 164 180
1-1/4 100 111 88 97 201 222
1-3/8 121 134 106 117 242 267
1-1/2 144 158 126 138 287 315
1-5/8 166 184 146 161 333 368
1-3/4 193 213 169 186 386 426
1-7/8 219 242 192 212 438 484
2 249 273 218 239 499 547
2-1/4 311 343 272 300 622 685
2-1/2 381 418 333 366 761 837
2-3/4 455 500 398 438 910 1000
3 536 590 469 516 1071 1179
3-1/4 620 684 542 599 1240 1368
3-1/2 711 782 622 686 1421 1565
3-3/4 808 898 707 786 1615 1797
4 907 1017 794 890 1814 2034
4-1/4 1012 1142 885 999 2024 2283
4-1/2 1119 1274 979 1115 2238 2548

Approximate Capacity of 9-Part Braided Slings – tons of 2000 lbs.; 5:1 design factor
Flemish Eye Mechanical Splice 7×19 GAC; 6×19, 6×36 IWRC Wire Rope

EIPS – Extra Improved Plow Steel | EEIPS – Extra Extra Improved Plow Steel | Rated capacities of basket hitch based on D/d ratio of 25 times
the component rope diameter | Rated capacities based on pin or hook diameter no larger than natural eye width or less than the nominal sling
diameter | Horizontal sling angles less than 30° shall not be used | For new slings or slings in new, unused condition

Products

Information

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

dynarope® HF37 dynarope® Tensiometer

dynarope® HF37 dynarope® Tensiometer

The dynarope® tension meter is a precision device for measuring forces in a tensioned cable or rope. The meter can be attached directly to the cable and has a fixed display.

When the tension meter is placed on a tensioned cable, the load cell will generate a signal which is more or less proportional to the force.

The HF 37 series can be connected to a PC for managing and storing measurement results.

There is a large variety of cables, each cable having its own characteristics such as composition, diameter, rigidity, density, etc. The database includes several basic wire rope data. We are happy to help you choose the right model and parameter settings in our wire rope database.

dynarope® HF 36 – Tensiometer

dynarope® HF 36 – Tensiometer

The dynarope® HF 36 is an electronic load cell that has been designed to measure the effort applied in a wire rope. The resulting signal is used in a digital remote display (model HF 87/T/LPT) controlled by a microprocessor, which corrects the force information according to the wire rope specification and displays the result of the measurement on a LCD display.

Several wire ropes specifications are logged in a data bank.

dynasafe® HF 05 Tension Load Limiting Cell

dynasafe® HF 05 Tension Load Limiting Cell

The dynasafe® HF 05 mechanical load cell has been designed to provide a trip point in lifting systems, which have a dead-end wire rope. The trip point load limiter generates an “all or nothing” type signal in the event the programmable target value is exceeded.  Available in one or two thresholds versions.

The load cell is preferable for fitting applications where it is essential to minimize the lost headroom.

dynafor® Expert- sensor only – capacity from 1/2 t to 10 t. Accuracy: +/- 0.1% dynamometer

dynafor® Expert- sensor only – capacity from 1/2 t to 10 t. Accuracy: +/- 0.1% dynamometer

The Dynafor® Expert, designed and manufactured by Tractel, is a wireless digital dynamometer, used in high precision applications. With its unique design, it allows to reach extreme precision.
Based on the principle of strain gauge extension measurement, the sensor generates an electrical signal which is processed and analyzed by a built-in microprocessor, which transmits the information to a wireless accessory.

Equipped with radio 2.4 GHz (RF) and Bluetooth (BLE) chipsets available all time, the Dynafor® Expert provides a wireless range of 1,300 ft. (400 m) to Tractel Dynafor® HHD, large displays AL128 and software accessories 100 ft. (30 m) to any smartphone equipped with our free Dynafor® app on iOS or Android
Compatible with standard bow and clevis shackles, the Dynafor® Expert ensures a perfect implementation in your applications.