| GROMMET BODY DIAMETER (INCHES) | VERTICAL | CHOKER | VERTICAL BASKET | |||
|---|---|---|---|---|---|---|
| Component: 6×19, 6×36 IWRC Wire Rope | ||||||
| EIPS | EEIPS | EIPS | EEIPS | EIPS | EEIPS | |
| 1/4 | 1.1 | 1.2 | 0.74 | 0.82 | 2.1 | 2.3 |
| 5/16 | 1.6 | 1.8 | 1.2 | 1.3 | 3.3 | 3.6 |
| 3/8 | 2.4 | 2.6 | 1.6 | 1.8 | 4.7 | 5.2 |
| 7/16 | 3.2 | 3.5 | 2.2 | 2.4 | 6.4 | 7.0 |
| 1/2 | 4.1 | 4.6 | 2.9 | 3.2 | 8.3 | 9.1 |
| 9/16 | 5.2 | 5.8 | 3.7 | 4.0 | 10 | 12 |
| 5/8 | 6.4 | 7.1 | 4.5 | 5.0 | 13 | 14 |
| 3/4 | 9.2 | 10 | 6.4 | 7.1 | 18 | 20 |
| 7/8 | 12 | 14 | 8.7 | 9.6 | 25 | 27 |
| 1 | 16 | 18 | 11 | 12 | 32 | 36 |
| 1-1/8 | 20 | 22 | 14 | 16 | 41 | 45 |
| 1-1/4 | 25 | 27 | 17 | 19 | 50 | 55 |
| 1-3/8 | 30 | 33 | 21 | 23 | 60 | 66 |
| 1-1/2 | 36 | 39 | 25 | 27 | 71 | 78 |
| 1-5/8 | 41 | 46 | 29 | 32 | 82 | 91 |
| 1-3/4 | 48 | 53 | 33 | 37 | 95 | 105 |
| 1-7/8 | 54 | 60 | 38 | 42 | 109 | 120 |
| 2 | 62 | 68 | 43 | 47 | 124 | 135 |
| 2-1/4 | 77 | 85 | 54 | 59 | 154 | 170 |
| 2-1/2 | 94 | 104 | 66 | 73 | 188 | 207 |
| 2-3/4 | 113 | 124 | 79 | 87 | 225 | 248 |
| 3 | 133 | 146 | 93 | 102 | 265 | 292 |
Approximate Capacity of Strand Laid Grommets – tons of 2000 lbs.; 5:1 design factor
Flemish Eye Mechanical Splice; 6×19, 6×36 IWRC Wire Rope
EIPS – Extra Improved Plow Steel | EEIPS – Extra Extra Improved Plow Steel | Rated capacities of basket hitch and vertical lift based on D/d ratio of 5 times the body diameter of the finished grommet | Rated capacities based on pin or hook no smaller than 5 times the grommet body diameter | Horizontal sling angles less than 30° shall not be used | For new slings or slings in new, unused condition
| GROMMET BODY DIAMETER (INCHES) | 60° BASKET | 45° BASKET | 30° BASKET | |||
|---|---|---|---|---|---|---|
| Component: 6×19, 6×36 IWRC Wire Rope | ||||||
| EIPS | EEIPS | EIPS | EEIPS | EIPS | EEIPS | |
| 1/4 | 1.8 | 2.0 | 1.5 | 1.7 | 1.1 | 1.2 |
| 5/16 | 2.8 | 3.1 | 2.3 | 2.6 | 1.6 | 1.8 |
| 3/8 | 4.1 | 4.5 | 3.3 | 3.7 | 2.4 | 2.6 |
| 7/16 | 5.5 | 6.1 | 4.5 | 4.9 | 3.2 | 3.5 |
| 1/2 | 7.2 | 7.9 | 5.9 | 6.4 | 4.1 | 4.6 |
| 9/16 | 9.1 | 10 | 7.4 | 8.1 | 5.2 | 5.8 |
| 5/8 | 11 | 12 | 9.1 | 10 | 6.4 | 7.1 |
| 3/4 | 16 | 18 | 13 | 14 | 9.2 | 10 |
| 7/8 | 22 | 24 | 18 | 19 | 12 | 14 |
| 1 | 28 | 31 | 23 | 25 | 16 | 18 |
| 1-1/8 | 35 | 39 | 29 | 32 | 20 | 22 |
| 1-1/4 | 43 | 48 | 35 | 39 | 25 | 27 |
| 1-3/8 | 52 | 57 | 42 | 47 | 30 | 33 |
| 1-1/2 | 62 | 68 | 50 | 55 | 36 | 39 |
| 1-5/8 | 71 | 79 | 58 | 64 | 41 | 46 |
| 1-3/4 | 83 | 91 | 68 | 75 | 48 | 53 |
| 1-7/8 | 94 | 104 | 77 | 85 | 54 | 60 |
| 2 | 107 | 117 | 87 | 96 | 62 | 68 |
| 2-1/4 | 133 | 147 | 109 | 120 | 77 | 85 |
| 2-1/2 | 163 | 179 | 133 | 146 | 94 | 104 |
| 2-3/4 | 195 | 215 | 160 | 175 | 113 | 124 |
| 3 | 230 | 253 | 188 | 206 | 133 | 146 |
Approximate Capacity of Strand Laid Grommets, Basket Hitches – tons of 2000 lbs.;
5:1 design factor; Flemish Eye Mechanical Splice; 6×19, 6×36 IWRC Wire Rope
EIPS – Extra Improved Plow Steel | EEIPS – Extra Extra Improved Plow Steel | Rated capacity of basket hitch based on D/d ratio of 5 times the body diameter of the finished grommet | Rated capacities based on pin or hook no smaller than 5 times the grommet body diameter Horizontal sling angles less than 30° shall not be used | For new slings or slings in new, unused condition
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Capacity Range: 1t ~ 10t Heavy Duty Quick Install Push Type Trolley Simple Installation, No Special Tools Required Fits both ‘S’ beams and ‘W’ beams Low Profile Design Corrosion Resistant Stainless Steel Plungers Corrosion Resistant Double Sealed Bearings Meets...
Adjustable to fit various beam widths A solid carbon steel design The wheels of the trolley fit both I-Beams and H-Beams Trolley wheels are parkerized for corrosion resistance High quality closed bearings provide smooth traversing With Anti-Drop plates Suitable for...
Adjustable to fit various beam widths A solid carbon steel design The wheels of the trolley fit both I-Beams and H-Beams Trolley wheels are parkerized for corrosion resistance High quality closed bearings provide smooth traversing With Anti-Drop plates Suitable for...
Solid carbon steel design Adjustable to fit various beam widths with traditional spacers Wheels of the units fit both I-beams and H-beams Trolley wheels are coated for corrosion resistance With anti-drop plates 100% stainless steel spark resistant & corrosion...
