Certex Logo

Categories

Crosby® 380 Series Easy Reeve® Hook Blocks

Crosby® 380 Series Easy Reeve® Hook Blocks
    • Wide range of product available.
      • Capacity: 5 to 80 Tons – Larger Models Available
      • Sheave Sizes: 10” to 20”.
      • Wireline Sizes: 7/16” to 1-1/4”
    • All single point shank hooks are genuine Crosby®, forged alloy steel, Quenched and Tempered, and have the patented QUICCHECK® markings (Duplex hooks are available on most sizes)
    • Design factor of 4 to 1 (unless otherwise noted).
    • All Easy Reeve® Blocks are furnished standard with Roller Bearings.
    • Reeving Guides Standard – All Models.
    • Blocks thru 25 Tons use 319N hooks with S-4320 latches.

Forged Crosby® alloy steel hooks with patented QUIC-CHECK® markings and Heavy Duty positive locking hook latch.

  • Heavy Duty Positive Locking (PL) Latch – Models: 30 Tons and larger.
  • Sheave lubrication through center pin – separate lube channel to each bearing.
  • Sheaves fully protected by side plates.
  • Dual action hook (swings and rotates).
  • Repair parts available through worldwide distribution network.
  • All Easy Reeve® blocks 16” and larger are furnished with McKissick® Roll-Forged sheaves with flame hardened grooves.
  • Manufactured by an ISO 9001 and API Q1 certified facility.
  • “Look for the Orange Hook … the mark of genuine McKissick® quality”.

Options Available

  • Duplex Hooks
  • Swivel Tee and Shackle Assemblies
  • Sheave Shrouds
  • Anti-Rotation Hook-Locking Device
  • Plate Steel Cheek Weights
  • Third party testing with Certification available upon request.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Palmer Safety Guardrail System

Palmer Safety Guardrail System

Guardrail System may be used in Fall Prevention applications ONLY. Fall Prevention Systems are placed around the leading edges of any and all fall hazards to prevent a worker from going over an edge, and may be used in substitute of Fall Protection or safety netting...

Modulift MOD 400/600 Spreader Beam

Modulift MOD 400/600 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. MOD 400/600 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/500 Spreader Beam

Modulift MOD 400/500 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/500 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/400 Spreader Beam

Modulift MOD 400/400 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/400 has an assembled span ranging from 6ft to 78ft in 1ft...