RUD PSA-VRS UNC Fall Protection Anchorage Point
WLL range 1 – 2 persons Non-removable special bolt
Categories
4” Low Profile Weld-On Winch
| STOCK NUMBER | DESCRIPTION | NUMBER IN BOX |
|---|---|---|
| 16SL | 4” Low Profile Weld-On Winch | 5 |
NOTE: FOR SAFE OPERATION
1. All winches should be installed so the user can readily see the pawl to ensure proper engagement.
2. The winch should be positioned so the pawl drops into the ratchet wheel by gravity.
3. Winches should never be installed so the user cannot see the pawl engagement or in a position where the user must hold the pawl to engage the ratchet tooth.
4. Weld on winches must be welded to the trailer frame. Minimum weld requirements are 1/4” fillet weld, 4” long on both sides of frame, and 1/8” penetration.
WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.
Related Products
RUD PSA-VRS Metric Fall Protection Anchorage Point
WLL range 1 – 2 persons Non-removable special bolt
RUD PSA-INOX Fall Protection Anchorage Point
WLL range 1 – 2 persons Ring body and bolt made from stainless steel Non-removable special bolt
RUD Load Ring – VLBS Ring Only
Large WLL range 1.5 t – 16 t Functionally optimized shape of the suspension ring for better support at side loading and protection of the clamping spring WLL possible up to 90° in load ring plane