The real beauty of this magnet is that it is fully automatic – no user interface is required to turn the magnet on or off. The secret lies in the built-in load-sensing system. This unique feature utilizes a self-adjusting shaft that turns the magnet on or off every time it completes a cycle. When the magnet is set down on a load, the shaft goes down, which engages the magnet. The magnet stays “on” until the load is set back down, whereby the shaft goes down and turns the magnet “off”. The operator also has the option to manually control the magnet by pressing the push buttons located on the side of the unit.
Palmer Safety Guardrail System
Guardrail System may be used in Fall Prevention applications ONLY. Fall Prevention Systems are placed around the leading edges of any and all fall hazards to prevent a worker from going over an edge, and may be used in substitute of Fall Protection or safety netting...
