Certex Logo

Categories

CM Cyclone Hand Chain Hoists

CM Cyclone Hand Chain Hoists

The Cyclone is a high speed, spur geared hoist that delivers maximum efficiency and requires minimum maintenance. Corrosion-resistant aluminum alloy frame construction is lightweight, yet rugged. CM Hoistaloy® load chain-equipped for flexibility, strength and durability. Low headroom and compact design make it easy to install. The hoist is equipped as standard with Load Limiter for automatic overload protection.

When the hoist is excessively overloaded, Load Limiter stops the lift.

Capacity (Ton) CERTEX Cat. Ref. No. Columbus McKinnon Code Standard Lift (Ft.) Strands of Chain Net Weight (Lb.) Shortest Distance Between Hooks (In.) Chain Overhauled to Lift Load One Foot (Ft.) Chain Pull to Lift Full Load (Lb.)
1/4 CX11-0211 4621 8 1 33 12 7/8 22 1/2 23
1/2 CX11-0212 4622 8 1 33 12 7/8 22 1/2 46
1 CX11-0213 4624 8 1 36 14 30 69
1 1/2 CX11-0214 4625 8 1 59 17 5/16 40 1/2 80
2 CX11-0215 4626 8 1 60 17 5/16 52 83
3 CX11-0216 4627 8 2 84 21 1/2 81 85
4 CX11-0217 4628 8 2 91 21 1/2 104 88
5 CX11-0218 4629 8 3 122 24 1/4 156 75
6 CX11-0219 4630 8 3 127 25 1/4 156 90
8 CX11-0220 4631 8 4 207 35 1/2 208 89
10 CX11-0221 4632 8 5 219 35 1/2 260 95

Standard hand chain drop reaches to a point 2 feet above lower hook when in its lowest position.

The Cyclone has a fully enclosed brake requiring no lubrication. Neither extremes of temperature nor frequent stops will affect its positive load control. Latch type hooks are standard on all capacities. Latchlok® hook available as optional equipment. Exclusive Lifetime guarantee.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Palmer Safety Guardrail System

Palmer Safety Guardrail System

Guardrail System may be used in Fall Prevention applications ONLY. Fall Prevention Systems are placed around the leading edges of any and all fall hazards to prevent a worker from going over an edge, and may be used in substitute of Fall Protection or safety netting...

Modulift MOD 400/600 Spreader Beam

Modulift MOD 400/600 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. MOD 400/600 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/500 Spreader Beam

Modulift MOD 400/500 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/500 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/400 Spreader Beam

Modulift MOD 400/400 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/400 has an assembled span ranging from 6ft to 78ft in 1ft...