Leading the lifting & rigging industry
Certex Logo

Categories

Dynamiclift Magnet 150 LB

Dynamiclift Magnet 150 LB

These lightweight and powerful rare earth permanent lift magnets can be used on flat or round surfaces and contain an internal release on/off device that does not contact or damage the surface of the part being lifted. DynamicLifts™ also offers excellent holding on thin gauge ferrous metals to comparable rare earth lift magnets.


EMAIL PAGE

EMAIL PAGE


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

CERTEX Cat. Ref. No. HEIGHT (IN) LENGTH (IN) WEIGHT (LBS) BAIL HEIGHT (IN) BAIL THICKNESS (IN) BAIL WIDTH (IN) WLL (LBS) HANDLE LENGTH (IN) MAGNET HEIGHT (IN) MAGNET LENGTH (IN) MAGNET WIDTH (IN) MAGNET POLE QUALITY
DL0150 10 5 6.1 2.25 0.25 3 150 2.5 2.75 3 2.5 2
  • On/Off Permanent Rare Earth Magnet
  • Handle Locks in the On Position
  • Lifts Flat or Round Loads
  • Easy Internal Manual Release Does Not Contact the Load
  • Large swivel lift lug
  • Heat Resistant Up To 180°F (82°C)
  • 3:1 Design Factor
  • Conforms To ASME B30.20 Standard

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Tiger TRCB Industrial Chain Block

Tiger TRCB Industrial Chain Block

Range from 500kg – 5.0t Meets or exceeds all international standards High quality alloy calibrated load chain Rugged steel body construction Drop forged & heat-treated alloy hooks Proof tested to 1.5 times rated capacity Lightweight and portable Safe reliable twin...

Tiger PROCB (TCB) Professional Chain Block

Tiger PROCB (TCB) Professional Chain Block

DNV GL Verification tested according to NORSOK R-002 Range from 250kg – 35.0t Available with slipping clutch overload protection Tested and certified for “fleeting”, “drifting” and “cross-hauling” applications up to 60° from the vertical without deration Available...

TAHS Pneumatic Air Hoist 250kg – 2t

TAHS Pneumatic Air Hoist 250kg – 2t

Range – 0.25 tonne to 2.0 tonne Reliable, fast, efficient, quiet and lightweight Greater than 5:1 factor of safety Suitable for Fleeting/Oblique pulling Certified for ATEX Category 3 – normal safety

Tiger TAH-M Twin Hook Air Hoist

Tiger TAH-M Twin Hook Air Hoist

TAH21M 2.0t/2.0t configuration TAH33M 3.0t/3.0t and 3.0t/6.0t configurations Two chain falls with hooks for alternate working Various hook options – standard, closed eye, grab and self-locking Integral load limiter Especially suitable for horizontal pulling Reliable,...