Certex Logo

Categories

Powerarm™ Receiver Mounted Electric Lift

Powerarm™ Receiver Mounted Electric Lift

Our Manhole PowerArm™ makes lifting and replacing manhole covers easier than ever. Just drive within 3 feet of the center of the manhole cover and let the Manhole PowerArm™ adjust to your location. The “Arm” has a 3ft., 180° swing radius and a double jointed elbow that allows the positioning of the magnet (sold separately) in the center of the manhole cover. Once the magnet is centered, turn the magnet to the “lock-on” position and use the winch control to start lifting the manhole cover. When the manhole cover is clear from its rim, swing the manhole cover away. Reverse the steps to replace the manhole cover. CAUTION: Manhole covers must be loose prior to lifting.

CERTEX Cat. Ref. No. HEIGHT (IN) LENGTH (IN) WIDTH (IN) WEIGHT (LBS) WLL (LBS)
MCLPAE2000 17.81 56.38 7.25 87 400

 

  • Power Arm
  • Hitch mount manhole cover lifter
  • 12 volt electric hoist with corded remote control and plug
  • Articulating arm for easy, precise lifting
  • Lifts covers up to 400 pounds

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Elephant DA / DB Type Electric Chain Hoist

Elephant DA / DB Type Electric Chain Hoist

DA TYPE : 1 SPEED, 3 PHASE SINGLE VOLTAGE DB TYPE: 2 SPEED, 3 PHASE SINGLE VOLTAGE An efficient motor that offers high lift speeds Quiet operation with a sealed protective body against dust Solid steel side plates for a rugged heavy duty construction Highly durable...

Elephant Beta Compact Electric Chain Hoist

Elephant Beta Compact Electric Chain Hoist

120kg & 200kg 1 Phase 115V Unit weight with standard lift is 10 lbs 11” headroom Ideal for carrying in tool boxes Overload protection device Overwind protection Plastic chain container Ratings JIS / ISO 1AM, FEM M4, ASME H3, Hoist protection is IP54, Pendant is...

Elephant Alpha Series Compact Electric Chain Hoist Single Phase

Elephant Alpha Series Compact Electric Chain Hoist Single Phase

The aluminum die cast body is designed for environments where noise levels must be kept to a minimum Compact design with low headroom, net weight of the hoists range from 32 lbs. with a standard 10’ lift Alpha S series has a single brake design Overload and overwind...

Elephant Super 100 Manual Chain Hoist Overload Protection

Elephant Super 100 Manual Chain Hoist Overload Protection

0.5t ~ 10 ton Overload protection safety device Grade 105 galvanized load chain, which adheres to the strict German DIN 5684 standard Galvanized hand chain Double pawls supporting fail-safe brake mechanism Load sheave with roller bearing The tough reinforced gear case...