Our Manhole PowerArm™ makes lifting and replacing manhole covers easier than ever. Just drive within 1 foot of the center of the manhole cover and let the Manhole PowerArm™ adjust to your location. The “Arm” has a 8-inch, 180° swing radius that allows the positioning of the magnet (sold separately) in the center of the manhole cover. Once the magnet is centered, turn the magnet to the “lock-on” position and use the winch to start lifting the manhole cover. When the manhole cover is clear from its rim, swing the manhole cover away or drive slowly forward a few feet. Reverse the steps to replace the manhole cover. CAUTION: Manhole covers must be loose prior to lifting.
Palmer Safety Guardrail System
Guardrail System may be used in Fall Prevention applications ONLY. Fall Prevention Systems are placed around the leading edges of any and all fall hazards to prevent a worker from going over an edge, and may be used in substitute of Fall Protection or safety netting...
