Certex Logo

Categories

Pyramex – RLTS31B Series

Pyramex - RLTS31B Series


ANSI
Moisture-wicking material // Rated UPF 30+ // Sizes M-5XL
RLTS3110B / RLTS3120B

MATERIALS

T-Shirt: 180 gsm lightweight solid moisture wicking polyester
Reflective Tape: China brand flat silver
Waist & Wrists: Weather resistant elastic band

REFLECTIVE STRIPING

One 2” silver reflective stripe applied horizontally across lower chest
Two 2” silver reflective stripes run vertically from top of horizontal stripes, over shoulders to top of back side horizontal stripe
Two 2” silver reflective stripes around both long sleeves
Lower stripe 4.5” below upper stripe
Upper stripe is applied 7” higher on sleeve than lower stripe

POCKETS

5.5” x 5.5” outside left chest patch pocket

JACKET MEASUREMENTS

SIZE M L XL 2X 3X 4X 5X
CHEST MEASUREMENT 38” – 40” 42” – 44” 46” – 48” 50” – 52” 54” – 56” 58” – 60” 62” – 64”

Jacket measurements are taken while garment is lying flat. Please note: some size variation may occur.

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Palmer Safety Guardrail System

Palmer Safety Guardrail System

Guardrail System may be used in Fall Prevention applications ONLY. Fall Prevention Systems are placed around the leading edges of any and all fall hazards to prevent a worker from going over an edge, and may be used in substitute of Fall Protection or safety netting...

Modulift MOD 400/600 Spreader Beam

Modulift MOD 400/600 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. MOD 400/600 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/500 Spreader Beam

Modulift MOD 400/500 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/500 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/400 Spreader Beam

Modulift MOD 400/400 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/400 has an assembled span ranging from 6ft to 78ft in 1ft...