Leading the lifting & rigging industry
Certex Logo

Categories

Lift Safety Radix Safety Helmet – Vented

Lift Safety Radix Safety Helmet - Vented
  • 12 Ventilation channels provide enhanced air flow for comfort and breathability
  • Brim grip, exclusive design provides a secure feel
  • Oversized ratcheting fitment dial to adjust size is easy to grip and use with gloves on or off
  • Integrated accessory clips with six (6) external built-in attachment points are compatible with a wide range of LIFT Accessories
  • Microfiber antimicrobial internal liner assists with moisture-wicking and comfort and is easy to replace and wash
  • Secure four-point connection with easy release magnetic lock
  • One size fits most, Standard Head Size 6 ½ – 8 (52-64 cm head circumference)

Colors:


EMAIL PAGE

EMAIL PAGE


WARNINGS & CAUTIONS

WARNINGS & CAUTIONS

The RADIX Vented Safety Helmet is comfortable thanks to its four-point LUX Suspension system, which guarantees the helmet will fit securely on the head. The magnetic quick-lock, adjustable chinstrap makes it ideal for working at height and on the ground. The ventilated outer shell protects against impact hazards. With its potential for integrating an ARCLIGHT headlamp, LIFT hearing protection, and multiple accessories, it is an entirely modular helmet, thus meeting the specific needs of multiple industries.

CERTIFICATIONS: ANSI Z89.1, TYPE 2, CLASS C, Certified ANSI Type 2 standards, protects from side, front and rear impacts

Download complete information on the RADIX here.

Hard Hat Weight

Our Safety Helmet weighs in at an average 495 grams with suspension.

Application of Use

Working-at-heights, Confined Space, Heavy
Industrial, Rescue, Arborist and General Construction.

Lifespan

3 – 5 Year Average Liftspan:Hard hat lifespan may vary depending on the conditions of each work site. Hard hats subjected to more wear and tear or used outdoors in direct sunlight may need to be replaced more frequently. Daily inspections are the best way to determine when to replace a hard hat shell, suspension, or the entire unit. Suggested replacement is based on service life (Based on when the hard hat was placed into service, not the manufacture date).

As a general guideline we recommend replacing hard hats every 3-5 years regardless of outside appearance, but this can vary due to use and job site conditions

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Palmer Safety Guardrail System

Palmer Safety Guardrail System

Guardrail System may be used in Fall Prevention applications ONLY. Fall Prevention Systems are placed around the leading edges of any and all fall hazards to prevent a worker from going over an edge, and may be used in substitute of Fall Protection or safety netting...

Modulift MOD 400/600 Spreader Beam

Modulift MOD 400/600 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve different spans. MOD 400/600 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/500 Spreader Beam

Modulift MOD 400/500 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/500 has an assembled span ranging from 6ft to 78ft in 1ft...

Modulift MOD 400/400 Spreader Beam

Modulift MOD 400/400 Spreader Beam

The Modulift Spreader is modular in length, and every spreader consists of 1 pair of End Units and Drop Links, with intermediate struts that can be bolted into the assembly to achieve dierent spans. MOD 400/400 has an assembled span ranging from 6ft to 78ft in 1ft...