Certex Logo

Categories

Regular Wear Pads

Regular Wear Pads

REGULAR – This is the type that is sewn on to give fixed protection at expected wear points. They can be sewn anywhere on the sling, at any length on one side or on both sides.

CERTEX Cat. Ref. No. Size A B C D E F G Approx. Weight (lbs.) Rated Capacity (lbs.) Minimum Break
CX07-0091 T2 4 3 5/8 2 1/4 1 3/4 15/16 2 3/8 9/16 .31 3,360 16,800
CX07-0092 T3 5 1/4 5 3 1/4 2 1 3/16 3 5/16 5/8 .75 5,000 25,000
CX07-0093 T4 6 1/4 6 5/8 4 3/8 2 3/8 1 7/16 4 11/16 1.1 6,700 33,500
CX07-0094 T6 8 5/16 8 7/8 6 3/8 3 1/8 1 3/4 5 1/2 15/16 2.7 9,700 48,500

WARNING: Prop 65: Products supplied by CERTEX USA may expose you to chemicals including Nickel, which is known to the State of California to cause cancer. For more information, visit to www.P65Warnings.ca.gov.

Related Products

Tiger TAH-M Twin Hook Air Hoist

Tiger TAH-M Twin Hook Air Hoist

TAH21M 2.0t/2.0t configuration TAH33M 3.0t/3.0t and 3.0t/6.0t configurations Two chain falls with hooks for alternate working Various hook options – standard, closed eye, grab and self-locking Integral load limiter Especially suitable for horizontal pulling Reliable,...

Tiger TAH52 Pneumatic Air Hoist 5t – 20t

Tiger TAH52 Pneumatic Air Hoist 5t – 20t

Range – 5.0 tonne to 20.0 tonne Reliable, fast, efficient, quiet and lightweight Greater than 5:1 factor of safety Suitable for Fleeting/Oblique pulling Certified for ATEX Category 3 – normal safety

Tiger TAH33 Pneumatic Air Hoist 3t – 10t

Tiger TAH33 Pneumatic Air Hoist 3t – 10t

Range – 3.0 tonne to 10.0 tonne Reliable, fast, efficient, quiet and lightweight Greater than 5:1 factor of safety Suitable for Fleeting/Oblique pulling Certified for ATEX Category 3 – normal safety

Tiger TAH21 Pneumatic Air Hoist 1.5t – 3t

Tiger TAH21 Pneumatic Air Hoist 1.5t – 3t

Range – 1.5 tonne to 3.0 tonne Reliable, fast, efficient, quiet and lightweight Greater than 5:1 factor of safety Suitable for Fleeting/Oblique pulling Certified for ATEX Category 3 – normal safety